Department of Mechanical Engineering

Avatar

Dr. Abdullah Al-Faruk

Professor
+88 041 769 471 Ext. 417
[email protected]
Personal Webpage
Research Interest:

Print Profile
Email Me

Bio

Publication

Journal
11. Islam,J. and Al-Faruk,A. A. (2020) , " Numerical Study on the Effects of Total Solid Concentration on Mixing Quality of Non-Newtonian Fluid in Cylindrical Anaerobic Digesters," Journal of Mechanical and Manufacturing Process, Helics Group LLC, vol1, no.1, pp.1-10
10. Sakib,S. and Al-Faruk,A. A. (2018) , " Flow and Thermal Characteristics Analysis of Plate Finned Tube and Annular-Finned Tube Heat Exchangers for In-Line and Staggered Configurations," Mechanics and Mechanical Engineering, Lodz University of Technology, vol22, no.4, pp.1407–141
9. Rahi,K. H. ,Mortuza,G. M. and Al-Faruk,A. A. (2018) , " Development of a source code to analyze the effect of Reynolds number on a square lid driven cavity," Journal of Mechanical and Energy Engineering, Koszalin University of Technology, vol2(42), no.2, pp.147-154
8. Khan,M. M. I. and Al-Faruk,A. A. (2018) , " Comparative Analysis of Aerodynamic Characteristics of Rectangular and Curved Leading Edge Wing Planforms," American Journal of Engineering Research , vol7, no.5, pp.281-291
7. Al-Faruk,A. A. and Sharifian,A. (2017) , " Flow field and performance study of vertical axis Savonius type SST wind turbine," Energy Procedia, Elsevier, vol110, pp.235-242
6. Al-Faruk,A. A. and Sharifian,A. (2016) , " Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel," Alexandria Engineering Journal, Elsevier, vol55, no.3, pp.2055–206
5. Al-Faruk,A. A. and Sharifian,A. S. (2015) , " Effects of flow parameters on the performance of vertical axis swirling type Savonius wind turbine," International Journal of Automotive and Mechanical Engineering, UMP Publisher, vol12, pp.2929-2943
4. Halder,M. R. ,Al-Faruk,A. A. and Nabi,M. H. (2011) , " Effects of Flow and Atomizer Parameters on the Spray Cone Angle in a Hollow Cone Swirl Atomizer," Journal of Engineering Science, Faculty of Civil Engineering, KUET, vol2, no.1 & 2, pp.1-9
3. Al-Faruk,A. A. , Ahmed,N. , Haque,M. A. and Mahmud,S. A. (2011) , " Design of a Knowledge-Based Manufacturing Flow Shop Sequencing System using Fuzzy Logic," International Journal of Engineering & Applied Sciences, Akdeniz University, vol3, no.3, pp.1-14
2. Al-Faruk,A. A. , Hasib,M. A. , Ahmed,N. and Das,U. K. (2010) , " Prediction of Weld Bead Geometry and Penetration in Electric Arc Welding using Artificial Neural Networks," International Journal of Mechanical & Mechatronics Engineering, IJENS, vol10, no.4, pp.19-24
1. Hasib,M. A. ,Al-Faruk,A. A. and Ahmed,N. (2010) , " Mist Application of Cutting Fluid," International Journal of Mechanical & Mechatronics Engineering, IJENS, vol10, no.1, pp.13-18
Conference
20. (25 February 2021) , "Numerical Simulation of an Oscillating Water Column Device and Investigating the Effects of Lip Submergence on Velocity and Pressure," 13th International Conference on Mechanical Engineering , AIP Conference Proceedings, pp.040004-1-6
19. (19-21 December 2020) , "Effect of Cant Angles on the Aerodynamic Performances of an Airplane Wing with Blended Type Winglet: Numerical Analysis," 6th International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
18. Khan,M. T. ,Islam,S. M. and Al-Faruk,M. I. I. a. A. A. (19-21 December 2020) , "Effect of Dynamic Stall on the Flow Characteristics of a Darrieus Wind Turbine Blade at Low Wind Speed: A Numerical Approach," 6th International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
17. Paul,R. D. and Karua,A. A. a. P. (19-21 December 2020) , "A Numerical Study on the Drag Reduction of Sedan Car using Vortex Generator," 6th International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
16. Hasan,M. M. and Al-Faruk,A. A. , "Numerical Study on the effect of Mach Number and Angle of Attack on Shock Wave Formation in Transonic Regime," International Conference Mechanical Engineering and Renewable Energy , CUET
15. Mohsin,S. I. and Al-Faruk,A. A. (18-20 December) , "Numerical Simulation of an Oscillating Water Column Device and Investigating the Effects of Lip Submergence on Velocity and Pressure," 13th International Conference on Mechanical Engineering , Department of Mechanical Engineering, BUET
14. Khan,M. T. ,Inam,M. I. and Al-Faruk,A. A. ( 19-22 Jan 2019) , "CFD Analysis of a Floating Offshore Vertical Axis Wind Turbine," 1st International Conference on Sustainability in Natural and Built Environment , GCSTMR
13. Islam,N. , Islam,M. M. , Mashud,M. and Faruk,A. A. (23-24 December, 2018) , "Experimental Study on NACA 2415 Airfoil with Rotating Cylinder at Leading Edge," 5th International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
12. Khan,M. T. ,Inam,M. I. and Al-Faruk,A. A. (23-24 December, 2018) , "Effect of Tip Speed Ratio on the Flow Characteristics of Single-bladed Darrieus Wind Turbine," 5th International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
11. Khan,M. T. ,Inam,M. I. and Al-Faruk,A. A. (28 September 2018) , "Numerical Analysis of Flow Characteristics around a Single-bladed Darrieus Wind Turbine," International Conference on Energy & Environment , Shahjalal University of Science & Technology
10. Hossain,S. M. T. and Al-Faruk,A. A. (18-20 December, 2017) , "Analysis of Simple and Cantilever Beams using MATLAB Graphical User Interfaces," 4th International Conference on Mechanical Engineering and Renewable Energy , CUET
9. Al-Faruk,A. A. ,Sharifian,A. and Wandel,A. P. (2015) , "CFD Study of Detailed Flow Field and Performance of Swirling Savonius Wind Turbine," 11th International Conference on Mechanical Engineering , Department of Mechanical Engineering, BUET
8. Al-Faruk,A. A. and Sharifian,A. (8-11 December 2014) , "Influence of Blade Overlap and Blade Angle on the Aerodynamic Coefficients in Vertical Axis Swirling type Savonius Wind Turbine," 19th Australasian Fluid Mechanics Conference , Australasian Fluid Mechanics Society
7. Al-Faruk,A. A. and Sharifian,A. (September 2012) , "Angular Velocity of a Combined Unloaded Savonius Turbine with a Vortex Inducing Chamber - a CFD Approach," Southern Regional Engineering Conference , Engineers Australia
6. Al-Atresh,R. A. ,Sharifian,S. and Al-Faruk,A. A. (3-7 December 2012) , "The effect of inlet velocity and temperature on the strength of the swirling induced by a spilt channel: A CFD approach," 18th Australasian Fluid Mechanics Conference , Australasian Fluid Mechanics Society
5. Al-Faruk,A. A. ,Sharifian,A. S. and Al-Atresh,S. A. (3-7 December 2012) , "Numerical Investigation of Performance of a New Type of Savonius Turbine," 18th Australasian Fluid Mechanics Conference , Australasian Fluid Mechanics Society
4. Bari,M. A. A. , Al-Faruk,A. A. , Nabi,M. and Halder,M. R. (23-24 December, 2010) , "Effects of Flow and Atomizer Parameters on the Spray Cone Angle in a Hollow Cone Swirl Atomizer," International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
3. Al-Faruk,A. A. , Bari,M. A. A. , Shaheed,M. , Jubayer,A. A. and Halder,M. R. (23-24 December, 2010) , "Catalytic Upgrading of Vegetable Oil," International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
2. Al-Faruk,A. A. ,Hasib,M. A. and Ahmed,N. (23-24 December, 2010) , "Optimization of Process Parameters in MIG Welding using Analytical Hierarchy Process," International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET
1. Hasib,M. A. ,Al-Faruk,A. A. and Ahmed,N. (23-24 December, 2010) , "Mist Application of Cutting Fluid in Milling Machine," International Conference on Mechanical, Industrial and Energy Engineering , Faculty of Mechanical Engineering, KUET

Education

Scholarship and Award

Research

Experience

Teaching and Supervision

Course Conduction Roll No Student Name Project/Thesis Title Year 1105017 Md. Al-Mahmud Rana Study of Aerodynamic Characteristics of 2D NACA 4412 Airfoil 2016 1205038 Kamrul Hasan Rahi Study on the effects of Reynolds number on square lid driven cavity 2017 1205040 S.M. Rasheduzzaman Study on the Effect of Reynolds Number for 2-D NACA 4412 Airfoil Model Using Different Turbulence Model 2017 1205046 MD. Mahidur Rahman Infrared Based Automatic Car Parking System 2017 1205063 Md. Monirul Islam Khan Numerical analysis of the Performance of NACA 2412 Airfoil with Curved Leading Edge Planform 2017 1305083 Md. Shariful Islam Design and fabrication of single acting reciprocating water pumping system using scotch yoke mechanism 2018 1305103 Nashidul Islam Experimental Study of NACA 2415 Airfoil with Leading Edge Rotating Cylinder 2018 1405025 Rana Ahmad CFD Multiphase Modelling of Gas Mixing in an Anaerobic Digester 2019 1405064 Jahirul Islam Modelling of Non-Newtonian Fluid Flow in Anaerobic Digesters 2019 1405065 Rudro Pahlowan Design, Construction and Performance Test of a Crankshaft Operated Multiblade Power Hacksaw 2019 1405092 Syed Ibn Mohsin Numerical Simulation of an Oscillating Water Column Device Using ANSYS 2019 1505043 Md. Shahadat Hossan Sayem Numerical Analysis of Aerodynamic Characteristics of Aeroplane Wing with Winglets 2020

Last Update: 10-Mar-2024