Department of Mechanical Engineering

Avatar

Dr. Md. Shariful Islam

Professor
+88 041 769 471 Ext. 439
[email protected]
Personal Webpage
Research Interest: Impact Resistance of Polymeric Materials Investigation on Mechanical Properties of Natural Fiber Composites Textile Composites as Cryogenic Fuel Tank Investigation of Free Edge Effect in Composites Interlaminar Strengthening of Composites Through Additive Manufacturing

Print Profile
Email Me

Bio

Dr. Md. Shariful Islam is currently working as a professor in the Department of Mechanical Engineering at Khulna University of Engineering & Technology. Dr. Islam has earned his Ph.D. and M.Sc. in Mechanical Engineering from The University of Texas at El Paso, USA and B.Sc. in Mechanical Engineering from Khulna University of Engineering & Technology, Bangladesh. Dr. Islam's research interest includes Natural Fiber Composites, Fiber Metal Laminates and Multi-scale Material Modeling.

Publication

Journal
13. Islam,M. S. and Xu,L. R. (2022.) , " Nonlinear Impact Force Reduction of Layered Polymers with the Damage-Trap Interface," applied sciences, MDPI, vol12, no.14
12. (2022.) , " Simplified indentation mechanics to connect nanoindentation and low-energy impact of structural composites and polymers," Journal of Reinforced Plastics and Composites, SAGE Publications
11. Jubair,K. ,Islam,M. S. and Chakraborty,D. (2021.) , " Investigation of Mechanical Properties of Banana-Glass Fiber Reinforced Hybrid Composites," Journal of Engineering Advancements, SciEn, vol02, no.04, pp.175-179
10. Chakrabarti,D. ,Islam,M. S. and Sarker,K. J. a. M. R. H. (2020.) , " Effect of Chemical Treatment on the Mechanical Properties of Luffa Fiber Reinforced Epoxy Composite," Journal of Engineering Advancements, SciEn, vol01, no.02, pp.37-42
9. Asif,M. ,Rahman,K. A. and Islam,M. O. F. a. M. S. (2020.) , " Comparative Study on Mechanical Properties of Bamboo Strip and Bamboo Strip-glass Fiber Reinforced Hybrid Composites," Journal of Engineering Advancements, SciEn, vol01, no.01, pp.06-10
8. Islam,M. and Almamun,S. A. a. A. (2019.) , " Comparative Study on Mechanical Properties of Banana and Rattan Fiber Reinforced Epoxy Composites," American Journal of Engineering Research (AJER), vol8, no.2, pp.01-06
7. (2019.) , " Numerical Analysis of Impact Resistance of Polypropylene," International Journal of Mechatronics and Manufacturing Technology, vol4, no.1, pp.01-11
6. (2018.) , " Numerical Analysis of Thermo-hydraulic Performance of Ground Heat Exchanger," Mechanical Engineering Research Journal, CUET, vol11, pp.38-43
5. Islam,M. ,Prabhakar,a. P. and ,(2017.) , " Interlaminar Strengthening of Multidirectional Laminates using Polymer Additive Manufacturing," Materials & Design, Elsevier, vol133, pp.332-339
4. Castellanos,A. , Islam,M. , Tarango,E. , Lin,Y. and Prabhakar,a. P. (2018.) , " Interlaminar reinforcement for enhancing low-velocity impact response of woven composites," Textile Research Journal, SAGE, vol88, no.15, pp.1710-1720
3. (2017.) , " Modeling Framework for Free Edge Effects in Laminates under Thermo-Mechanical Loading," Composites Part B: Engineering, Elsevier, vol116, pp.89-98
2. Castellanos,A. , Islam,M. , Shuvo,M. , Lin,Y. and Prabhakar,a. P. (2018.) , " Nanowire Reinforcement of Woven Composites for Enhancing Interlaminar Fracture Toughness," Sandwich Structures and Materials, SAGE, vol20, no.1, pp.70-85
1. Islam,M. , Melendez-Soto,E. M. , Castellanos,A. and Prabhakar,a. P. (2015.) , " Investigation of Woven Composites as Potential Cryogenic Tank Materials," Cryogenics, Elsevier, vol72, pp.82-89
Conference
31. Ahammad,R. ,Faruk,M. and Islam,A. D. a. M. (January 2023) , "Effect of Adhesive Layer Thickness and Adherent Geometry on the Tensile Properties of Adhesively Bonded T- Joint," International Conference on Engineering Research, Innovation and Education
30. Sarker,S. , Takey,A. , Ahammad,R. and Arifuzzaman,M. I. a. M. (December 2022) , "Mechanical Behavior of Sandwich Structure Made of Perlite Foam Core and JFRP Skin," International Conference on Mechanical, Industrial and Energy Engineering
29. Islam,A. ,Debnath,A. and Arifuzzaman,M. I. a. M. (December 2022) , "Numerical Analysis of the Rear Wing Mount of a Formula 1 Type Car for Material Selection," International Conference on Mechanical, Industrial and Energy Engineering
28. Debnath,P. , Debnath,A. , Ahammad,R. and Islam,M. A. a. M. (December 2022) , "Numerical Simulation of Bi-Adhesive Lap Joints," International Conference on Mechanical, Industrial and Energy Engineering
27. Ahammad,R. , Debnath,A. , Rahman,M. and Islam,M. A. a. M. (December 2022) , "Mechanical Characterization of Date Palm Rachis Fiber Reinforced Epoxy Composite," International Conference on Mechanical, Industrial and Energy Engineering
26. Antu,M. and Islam,M. H. a. M. (December 2022) , "Effect of Temperature on the Tensile Properties of Adhesively Bonded Single Lap Joint," International Conference on Mechanical, Industrial and Materials Engineering
25. Hasan,M. and Islam,M. A. a. M. (December 2022) , "Numerical Study of Negative Stiffness Honeycomb Structure for Energy Absorption Applications," International Conference on Mechanical, Industrial and Materials Engineering
24. Khan,M. A. I. and Islam,Z. F. a. M. S. (December 2020.) , "Mechanical Characterization of Drumstick Fiber Reinforced Epoxy Composite," International Conference on Mechanical, Industrial and Energy Engineering 2020
23. (December 2020.) , "Investigation of Mechanical Properties of Bagasse Fiber and Human Hair Reinforced Hybrid Composite," International Conference on Mechanical, Industrial and Energy Engineering 2020
22. Rayhan,Z. and Hasan,M. S. I. a. D. W. (December 2020.) , "Investigation of Mechanical Properties of Jute, Cotton and Glass Fiber Reinforced Hybrid Composites," International Conference on Mechanical, Industrial and Energy Engineering 2020
21. Aziz,M. and Islam,a. M. (December 2017.) , "Effect of Lower Surface Modification on Aerodynamic Characteristics of an Airfoil," International Conference on Mechanical Engineering and Renewable Energy
20. Avila,R. and Prabhakar,M. I. a. P. (November 2016.) , "Thermal Gradient on Hybrid Composite Propellant Tank Materials at Cryogenic Temperatures," ASME 2016 International Mechanical Engineering Congress and Exposition
19. (September 2016.) , "Free Edge Effect in Multi-directional Laminate under Thermo-mechanical loading," ASC 31st Technical Conference
18. Avila,R. and Prabhakar,M. I. a. P. (August 2016.) , "Influence of Cryogenic Thermal Gradient on Composite Propellant Tank Materials," 17th US-Japan Conference on Composite Materials
17. (April 2016.) , "Free Edge effect in Multidirectional Laminates," The Southwest Emerging Technology Symposium
16. Tauhiduzzaman,M. ,Islam,M. and Prabhakar,a. P. (April 2016. ) , "Design Optimization of Sandwich Core and Manufacture Through Additive Manufacturing," The Southwest Emerging Technology Symposium
15. Avila,R. and Prabhakar,M. I. a. P. (April 2016.) , "Design and Testing of Hybrid Composite Materials for Cryogenic Fuel Tanks," The Southwest Emerging Technology Symposium
14. Islam,M. ,Avilla,R. and Prabhakar,A. C. a. P. (January 2016.) , "Hybrid Textile Composites as Potential Cryogenic Tank Materials," 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
13. Castellanos,A. , Islam,M. , Quevado,S. , Shuvo,M. and Prabhakar,Y. L. a. P. (January 2016.) , "Impact Response of Woven Composites with Interlaminar Reinforcement," 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
12. Islam,M. and Prabhakar,A. C. a. P. (September 2015.) , "Effect of Curing Induced Parameters during Manufacturing of Textile Composites," ASC 30th Technical Conference
11. Castellanos,A. , Islam,M. , Quevedo,S. , Shuvo,M. and Prabhakar,Y. L. a. P. (September 2015.) , "Nanowire Stiffening of Woven Composites Towards Enhancing Interlaminar Fracture Toughness," ASC 30th Technical Conference
10. Islam,M. and Prabhakar,E. M. a. P. (April 2015.) , "Experimental Investigation of Woven Composites as Potential Cryogenic Tank Materials," 5th Southwest Energy Science and Engineering Symposium
9. (December 2014.) , "Effect of Compaction during Manufacturing of Textile Composites," International Conference on Mechanical, Industrial and Energy Engineering
8. Leanos,A. and Prabhakar,M. I. a. P. (December 2014.) , "Modeling Progressive Damage and Failure for Polymer Matrix Composites," International Conference on Mechanical, Industrial and Energy Engineering
7. (September 2014.) , "Computational Modeling of Curing Induced Damage due to Compaction on Woven Fabric Composite," ASC 29th Technical Conference/16th US-Japan Conference on Composite Materials
6. Leanos,A. and Prabhakar,M. I. a. P. (September 2014.) , "Novel Computational Framework for Thermal Shock Resistance Design of Carbon Composites," ASC 29th Technical Conference/16th US-Japan Conference on Composite Materials
5. Islam,M. ,Prabhakar,P. and Stapleton,H. K. a. S. (June 2014.) , "Prediction of Damage due to Compaction during Manufacturing of Textile Composites," 16th European Conference on Composite Materials
4. Islam,M. and Prabhakar,a. P. (March 2014.) , "Prediction of Damage due to Compaction during Manufacturing of Textile Composites," 4th Southwest Energy Science and Engineering Symposium
3. (December 2011.) , "A Study of Baseball Aerodynamic Drag," International Conference on Mechanical Engineering
2. (December 2011.) , "Aerodynamics of A Baseball- An Effect of Seams," International Conference on Mechanical Engineering and Renewable Energy
1. (December 2010.) , "Heat Transfer Characteristics of Rectangular Blocks in a Channel," International Conference on Mechanical, Industrial and Energy Engineering

Education

Ph.D. Mechanical Engineering
University of Texas at El Paso,United States (2016)
M.Sc. Mechanical Engineering
University of Texas at El Paso,United States (2013)
B.Sc. Mechanical Engineering
Khulna University of Engineering & Technology,Bangladesh (2008)

Scholarship and Award

  • University Merit Scholarship, Khulna University of Engineering & Technology, Khulna, Bangladesh

  • Best Paper Award, 3rd International Conference on Mechanical, Industrial and Energy Engineering, (ICMIE 2014), Khulna University of Engineering & Technology, Khulna, Bangladesh, December, 2014

  • Cytec Student Paper Award for Composite Processing, ASC 29th Technical Conference/16th US-Japan Conference on Composite Materials, San Diego, California, USA, September 2014

  • Graduate Teaching/Research Assistant, The University of Texas at El Paso, El Paso, TX, USA

  • Best Paper Award, 7th International Conference on Mechanical, Industrial and Energy Engineering, (ICMIE 2022), Khulna University of Engineering & Technology, Khulna, Bangladesh, December, 2022

Research

  • Impact Resistance of Polymeric Materials
  • Investigation on Mechanical Properties of Natural Fiber Composites
  • Textile Composites as Cryogenic Fuel Tank
  • Investigation of Free Edge Effect in Composites
  • Interlaminar Strengthening of Composites Through Additive Manufacturing

Experience

Service Records
  • Professor
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 01-Sep-2024 to 01-Sep-2024
  • Associate Professor
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 01-Sep-2024 to 01-Sep-2024
  • Assistant Professor
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 01-Sep-2024 to 01-Sep-2024
  • Lecturer
    Department/Section: Mechanical Engineering
    Khulna University of Engineering & Technology (KUET) 01-Sep-2024 to 01-Sep-2024

Teaching and Supervision


Last Update: 10-Mar-2024