KUET

Bio

kuet

Publication

Books

(2016) , Denim and Washing Technology , ISBN:978-984-91991-1-3,Granthanir Prokashoni, vol1

This book depict in details the latest development of garments washing process like dry wash process and wet wash process particularly suitable for denim and jeans fabric and garments.

Journal

31. Jalil,M. A. and Khan,R. C. S. a. M. A. (January 2013) , " Study on creep, fatigue and shear strength properties of Pineapple Leaf Fiber reinforced high impact polystyrene (HIPS) composites.," Bangladesh Journal of Jute and Fiber Research (BJJFR), vol3, no.1

24. Jalil,M. A. ,Sinha,R. C. and Rokonuzzaman,A. M. A. M. , " A comparative study of quality control of fine jute yarn conventional drawing method Vs modified drawing method.," International Journal of Textile and Fashion Technology(IJTFT), Vol 1, Issue 1,pp1-10, 2011

23. Razzak,A. and Md.Rokonuzzaman,M. A. J. A. M. , " Effect of spindle speed of ring frame on yarn quality.," Journal of Science and Technology Vol: 2 No: 2, pp 149-151,May-2012 ISSN NO.: 2079-472X

22. Md.Rokonuzzaman,M. , Jalil,M. A. , Razzak,A. and Chakraborty,S. I. A. S. S. , " Effect of different processes on rotor yarn quality.," Journal of Science and Technology Vol: 2 No: 1,pp 19-23, January-2011 ISSN NO.: 2079-472X

21. Hossain,M. M. , Jalil,M. A. , Saha,J. and Rahman,M. M. M. A. M. M. (May 2011) , " Impact of various yarn of different fiber composition on the dimensional properties of different structure of weft knitted fabric.," International Journal of Textile and Fashion Technology(IJTFT), vol2, no.1, pp.33-34

20. Md,M. , Hossain,M. , Karmaker,R. , Bain,S. and Saha,M. A. J. A. J. , " Investigation of influence of twill structures on jute-cotton union fabric physical properties," IJASETR 1 (2) pp 60-72, April 2012. ISSN:1839-7239

19. Jalil,M. A. and A.K.M.Mahabubuzzaman,R. C. S. A. A. , " Study on the physical and structural properties of jute-PALF blended apron draft ring spun yarn.," Journal of Textile and Apparel Technology and Management, NC State University, USA (Submitted)

18. Jalil,M. A. and A.K.M.Mahabubuzzaman,R. C. S. A. A. (June 2013) , " Analysis of physico-mechanical properties of jute-PALF union fabrics.," Jahangirnagar University Journal of Science (JUJS), vol31, no.3, pp.45-56

17. Jalil,M. A. ,Sinha,R. C. and A.K.M.Mahabubuzzaman,A. A. (December 2012) , " Study on physico-mechanical properties of Pineapple Leaf Fiber (PALF) and its spinning performance.," Journal of Engineering and Applied Science (JEAS), vol2, no.2, pp.23-27

16. Mir,S. ,Hossain,M. M. and Parvez,M. A. J. a. S. (June 2013) , " Effect of Enzyme Wash on Denim Garments.," Journal of Textile Engineers and Technologists, Bangladesh, vol2, no.2, pp.21-28

15. Jalil,M. A. , Rokonuzzaman,M. , Razzaque,A. and Afroz,A. H. a. N. (April 2011) , " Effect of delivery speed on winding machine on yarn hairiness.," Journal of innovation and development strategy (JIDS). ISSN NO:1997-2571, vol5, no.1, pp.6-8

14. Jalil,M. A. and Pervaz,M. H. A. S. (April 2013) , " Importance of Sample Making in Apparel Merchandising.," Textile Today, vol2, no.1, pp.65-66

13. Rahman,M. M. ,Shaid,A. and Hossain,M. A. J. A. M. B. (March 2009) , " Semi Biological Effluent Treatment In Textile Waste Water Management," International Journal of Engineering and Technology (IJET), vol6, no.1, pp.404-409

12. Jalil,D. M. A. , Hossain,M. T. , Islam,M. M. and Roy,M. R. &. P. K. (2015) , " To Estimate the Standard Minute Value of a Polo-Shirt by Work Study," Global Journal of Researches in Engineering: G Industrial Engineering, vol15, no.2

11. Miazi,M. , Mahabubuzzaman,A. , Maniruzzaman,M. , Jalil,&. M. A. and ,(2009) , " Effect of Twist on Productivity of Fine Jute Yarn Produced by Modified ring Spinning Machine," Journal of Innovation, Development and Strategy, pp.14-16

10. Uddin,N. ,Afroz,F. and Jalil,M. A. (2015) , " Retrofitting of Simple Mechanical Compacting Device (RoCoS) on Conventional Ring Spinning Machine for Improving Yarn Quality.," European Scientific Journal, vol11

9. Hossain,M. T. , Islam,M. M. , Jalil,M. A. and Siddika.,M. N. U. &. A. (2015) , " The Effect of Different Mordants on Dyeing of Cotton Fabric with Henna.," International Journal of General Engineering and technology (IJGET), ISSN 2278-9928, vol4, no.4, pp.1-8

8. Islam,M. M. , Haque,M. M. , Baral,L. M. and Jalil,M. A. , " Impact of Different Factors on Apparel Pattern Grading Accuracy. ," Journal of Textile and Apparel, Technology and Management, NC State University, USA. ISSN: 1533-0915 (Submitted)

7. Jalil,D. M. A. ,Hossain,D. M. I. and Islam,M. N. U. &. M. M. , " Investigation of physico-mechanical properties of Pineapple Leaf Fiber using a fuzzy-logic expert system," The Journal of the Textile Institute, UK (Submitted)

6. Jalil,M. A. , Parvez,M. S. , Siddika,A. and Rahman,&. M. M. (04 November 2019) , " Characterization and Spinning Performance of Pineapple Leaf Fibers: An Economic and Sustainable Approach for Bangladesh," Journal of Natural Fibers Taylor & Francis, pp.1-12

5. Islam,M. M. ,Jalil,M. A. and Haque,M. S. P. &. M. M. , " Assessment of the Factors Affecting Apparel Pattern Grading Accuracy: Problems Identification and Recommendations," Tekstilec, 2020, 63(3), 166â€“184 | DOI: 10.14502/Tekstilec2020.63.166-184

4. Alim,M. A. and Jalil,K. F. M. a. M. A. , " Surface modification of conductive PEDOT-PSS coated Jute yarns with silicone resin," Autex (Submitted)

3. Moniruzzaman,M. ,Jalil,M. A. and Zamman,M. I. H. a. M. , " Characterization of chemical-treated and gamma irradiated pineapple leaf fabric/epoxy composites: surface structure and physico-mechanical properties," Tekstil ve Muhendis (Journal of Textiles and Engineer) accepted

2. , " PEDOT: PSS and Graphene-Clad Smart Textile Based Wearable Electronic Joule Heater with High Thermal Stability," Chemistry of Materials-C (RCS) Under review

1. Jalil,M. A. ,Moniruzzaman,M. and Siddika,M. S. P. a. A. , " A Novel Approach for Pineapple Leaf Fiber Processing and Utilization Using Existing Machines," Cellulose (Springer Journal) Under review

Conference

5. Mahabubuzzaman,A. ,Miazi,M. O. G. and Jalil,M. A. a. M. (10-11 February 2011) , "Enrichment of Yarn Quality by the change of Drafting Zone of Drawing Machines," National Conference on Physics for Development

4. Paul,T. K. ,Parvez,M. S. and Hossain,M. A. J. a. M. I. (19-21 December 2020) , "A prognostic approach based on fuzzy logic methodology to speculate yarn quality ratio in Jute spinning industry," ICMIEE 2020, KUET

3. Sajib,M. M. K. and Jalil,M. S. P. a. M. A. (17-19 December 2019) , "Developing pillow speaker using conductive thread for E-textiles applications," International Conference on Mechanical, Industrial and Energy Engineering-2019,Faculty of Mechanical Engineering, RUET, Rajshahi.

2. Hossain,M. M. , Elahi,A. F. , Afrin,S. and Jalil,M. A. K. a. M. A. (18-20 December 2015) , "Mechanical property evaluation of PALF/polyester bio-composite," 11th International Conference of Mechanical Engineering-2015, BUET

1. Jalil,M. A. , Mahabubuzzaman,A. , Uddin,M. N. and Rahman,M. T. H. a. M. M. (18-20 December 2015) , "Physio-Mechanical Properties of Pineapple Leaf Fiber and its Spinning Performance," 11th International Conference of Mechanical Engineering-2015, BUET

Education

Doctor of Philosophy

Jahangirnagar University,Bangladesh (2008-2012) Student Type: Part Time,

B.Sc. in Textile Engineering

Bangladesh Textile University,Dhaka ()

Higher Secondary Certificate

Agailjhara College , ()

Secondary School Certificate

Rajapur Pilot High School , ()

Scholarship and Award

Recipient of University Grand Commission (UGC) fellowship in 2007 for 4 years to conduct PhD at Jahangirnagar University, Saver, Dhaka, Bangladesh
Project entitled Effect of privilege parameters of the Jute spinning machine on the physical and structural properties of the fine Jute yarn.

Research

Experience

Service Records

Professor

Department/Section: Textile Engineering
Khulna University of Engineering & Technology 01-Sep-2024 to 01-Sep-2024
Working Area: Yarn Manufacturing Engineering
Associate Professor

Department/Section: Textile Engineering
Mawlana Bhashani Science and Technology University 01-Sep-2024 to 01-Sep-2024
Working Area: Yarn Manufacturing Engineering
Assistant Profesor

Department/Section: Yarn Manfacturing
Mawlana Bhashani Science and Technology University 01-Sep-2024 to 01-Sep-2024
Superintendent
Textile Institute, Jhalokathi 01-Sep-2024 to 01-Sep-2024
Lecturer

Department/Section: Yarn Manfacturing
Textile Institute, Noakhali 01-Sep-2024 to 01-Sep-2024
Production Officer
Opex Group 01-Sep-2024 to 11-Aug-2000
Working Area: Apparel

Professional Body Membership

The Institution of Textile Engineers and Technologist (ITET), Bangladesh

Member Type: Associate Member
Member ID:
The Institution of Engineers (IEB), Bangladesh

Member Type: Associate Member
Member ID:

Teaching and Supervision

Course Conduction Supervised Undergraduate Students for Project / Thesis Work.

Dr. Mohammad Abdul Jalil

Bio